Mix 2 pales of water with 1 part of Super LTB Laying Mortar by using Mortar Mixer or hand to mix.
	Determine the laying position by tightening the tendon both vertically and horizontally. At the edge of the column, use dowel barfor proper bonding blocks and column.

Wet the surface of the blocks before laying and lay the blocks with Super LTB glue mortar which has the standard quality and only 3 mm thick of glue mortar will be applied to the blocks.
Super LTB can be cut down to size to fit the small gaps by using carbined tipped handsaw or electric saw.

	A chasing tool may be used to chase Super LTB for embedding sanitary and pipelines. This should be done 1 day after the laying process is complete.
	Plastering thickness should not exceed 10 mm in 2 layers. 5 mm thick of plastering mortar will be applied in each layer and must be applied after a gap 1 day between the 2 layers Delay solution can be used to ease the plastering process. In the case where special plastering mortar for ACC is used, only 1 layer of plastering mortar is required.